Showing posts with label weighing. Show all posts
Showing posts with label weighing. Show all posts

Whatever You Need Weighed and Measured - Crushed Stone, Ore, Cement, Coal, Food, Chemicals - We Can Help.

What do you need weighed and measured? Crushed stone? We can do that. Ore? That too. Cement? Coal? Food? Chemicals? No problem.

With SIEMENS field-proven SIWAREX weighing electronics, SIWAREX load cells, conveyor belt scales, solids flow meters and weighfeeders, SIEMENS weighs your world - with first-class solutions that help you accomplish almost any weighing task.

SIEMENS delivers over 50 years of experience in the weighing technology for continuous or static weighing and batching applications to optimize your process costs and quality.

  • Process weighing and gravimetric level measurement
  • Dosing/Filling/Bagging scale
  • Continuous Weighing
  • Force/Torque measurement

SIWAREX weighing electronics for SIMATIC

  • Seamless integrated weighing electronics for SIMATIC automation systems.

Stand-alone Weighing Electronics

  • SIWAREX weighing terminals and Siemens Milltronics integrators for stand-alone applications.

SIWAREX Load Cells

  • A wide selection of different designs, rounded off by mounting units to protect the against overloads or transverse loads.

Belt Scales

  • Systems for belt weighing featuring simple mounting and low maintenance, complemented by our high-resolution speed sensors.

Weighfeeders

  • Intelligent systems that continuously measure the load on the belt and the belt's velocity, from which they calculate the current delivery rate. 

Solids flow Meters

  • Low-maintenance solids flow meters for every application requiring continuous measurement of free-flowing bulk materials, powders, or granulates.


For more information about SIEMENS process instrumentation products, contact Ives Equipment. Call them at (877) 768-1600 or visit them at https://ivesequipment.com.

How to Align SIEMENS Beltscale Idlers


Proper beltscale idler alignment is critical for your beltscale to run at its best. Precise idler alignment is very important if maximum accuracy of the weighing system is to be achieved. Misaligned idlers will result in unwanted forces being applied on each idler in the weighing area, causing calibration and measurement errors.

The idlers in the weighing area must be properly aligned and leveled by shimming. This video explains how to align SIEMENS beltscale idlers in order to get the most out of your beltscale system.

Ives Equipment
https://ivesequipment.com
(877) 768-1600

Food Processing: Belt Scales Improve Tomato Processor Efficiency and Productivity

Belt Scales Improve Tomato Processor Efficiency
Belt Scales Improve
Tomato Processing
The following post is a case history on using alternative technology to improve large scale food preparation process.  You'll read about how belt scales outperformed legacy equipment for a tomato peeling process and increasing yield.

Application:

A tomato processor located on the Paciļ¬c coast uses the latest technologies in peeling, dicing, and packaging tomatoes. They were preparing to replace some of their older weigh feeders because of declining performance. One of their main concerns with installing new weigh feeders was the cost of moving the existing conveying systems in order to accommodate new weigh feeders.

See the document below for the full case history: